After the Light emitted by dying cells is photographed, it is decoded in successive oblong energy containers which are closed in by magnetic vectors? The successive oblong energy contaianers consist of Light delayed within an upper divided oblong chamber of two metres and a lower divided oblong chamber of two metres where Light is static. The segments dividing the two chambers 'vertically' are placed according to Time associated to the frequency of the Light at a specific height above a planet or object within its gravity count. The lines are concluded by a line which acts as a Time indicator and is slanted to no more than 15°, and which causes the other lines to fluctuate very slightly. (the degree of influence on the other lines has to be carefully calculated.)
These energy containers show the first crude steps in understanding the engineering of the lines I use for heating our home, etc.
The Light contains certain information about past proceedings and past reality, mostly caused by cosmic influence on the cell character. This information which is at first typified could then be depersonalised and generalised (or maybe an individual's code is enough to access the past). It may also be possibly used when considering one human life span as a codex for a journey of space flight, which is something to do with the curly string bits in the cell. If carefully analysed it could contain information on the cosmic-earth language exchange throughout a great length of time. It could also contain information about the breaking down of the chemical components of a person to be beamed and how to retain in-colour coding of his make up (his Decar), which would be built up again when the position desired for the rematierialisation has been reached.
Donnerstag, 2. Dezember 2010
Accessing Past Time Potential
It is the fact that the earth is moving that past Vision Voltage patterns can be photographed and utilized for space flight (i.e. past energy embracing billions of years which has the force and Time to convey a ship in today's present). We must remember that the present has a span of two decades and 0-x has to be considered as well as density-x. 0 would represent infinity, six and Nothing and any of these factors would be subtracted from Time by any required amount. I feel, however, that they should always bear a relation to each other.
These factors can be held in mind when considering a reduction in density, whether from maximum density or otherwise.
I feel there is a relationship between density and Time, i.e. that Time can be stored as density, i.e. made into a solid possibly by using vision and angles.
A ten second photographic exposure from anywhere upon the earth is needed from a height of six feet. The exposure only has to cover four square feet. The gravity count when photographing has to be 63.8 on my scale. Taking into account the speed of the earth there is a 1.5 second area of the past per second of exposure, (see ten second:ten minute ratio).
We can use gravity to pull in the past, by exchanging it with light and then exchanging light with gravity, (see formula). Gravity falls/pulls in the present, but it has also fallen/pulled in the past, and we can link past with present with coded light, especially that coming from dying cells.
Replacing gravity with light (see formula) is also essential as it is gravity which organises our present and when replacing it by light we can organise the light to go wherever we wish it to.
Once the gravity components under consideration are taken into account (my reality buds), the gravity situation of the past can be called up.
Retracing the steps of the planets in the solar system with their gravitational colour influence which induce words and action, or artificially producing the exact influence of the planets at a given time can help muster up at least a sound past model. Varying the different energies may cause confusion, but might be an opening to new dimensions.
These factors can be held in mind when considering a reduction in density, whether from maximum density or otherwise.
I feel there is a relationship between density and Time, i.e. that Time can be stored as density, i.e. made into a solid possibly by using vision and angles.
A ten second photographic exposure from anywhere upon the earth is needed from a height of six feet. The exposure only has to cover four square feet. The gravity count when photographing has to be 63.8 on my scale. Taking into account the speed of the earth there is a 1.5 second area of the past per second of exposure, (see ten second:ten minute ratio).
We can use gravity to pull in the past, by exchanging it with light and then exchanging light with gravity, (see formula). Gravity falls/pulls in the present, but it has also fallen/pulled in the past, and we can link past with present with coded light, especially that coming from dying cells.
Replacing gravity with light (see formula) is also essential as it is gravity which organises our present and when replacing it by light we can organise the light to go wherever we wish it to.
Once the gravity components under consideration are taken into account (my reality buds), the gravity situation of the past can be called up.
Retracing the steps of the planets in the solar system with their gravitational colour influence which induce words and action, or artificially producing the exact influence of the planets at a given time can help muster up at least a sound past model. Varying the different energies may cause confusion, but might be an opening to new dimensions.
Mittwoch, 1. Dezember 2010
Ratio Forming
Ratio forming with my 6er system involves matching and non-matching Time on the two faces of my clock. Ratio reckoning for space travel involves Time Alignment. If we can vary Time sequence then ratios become flexible.
For example 2:4, an initial relation between four dimensional natural space, represented by the number two, to a first stage expansion. Expanding the four but keeping the two involves Time Quants and e.
There are time units resulting from the synchronised world word at 360am and also from the ten sub divisions on my clock. The ten sub divisions start at 36 and increase to 360. Each of these subdivions is divided by 360 units and the factors of 0.1 are called Time Quants. Each 36 is 1.2 hours and the Time Quants equal 0.003 of an hour.
There is a larger outer clock face and an inner adjustable face. When they are both aligned they show the same time but the smaller clock face can be made to synchronise the large clock face with any other Time. This is useful for beaming to other atreas.
All areas have a partial common Time factor of 360am with its own shade and Other Time Quant colours, which vary from parallelogramme to parallelogramme and throughout the universe they mingle with this universal indication of a common Time. The 360am also has a symbol which with the use of the other symbols of other areas initiates a world word.
This world word synchronises speech and models the world and universe into an aspect of oneness.
With the use of the inner clock face ratios can be de-synchronized and volume and space/area can be gained by associating it to other time areas. Vocal units per hour also help in expanding Space/area with among other things their effect on gravity.
Using the above infomation we can expand the 4 to 6 while keeping the 2 and offering further relations to be made against it.
The way I have devised the world clock has exactly the measurements necessary for the above operations.
This way we can successfully run the large with/against the small and make any ratioing division even and therefore, resynchronised but with different perametres. It is important that the right hand part of the ratio is divisible by two.
(see added hand written information on next post)
For example 2:4, an initial relation between four dimensional natural space, represented by the number two, to a first stage expansion. Expanding the four but keeping the two involves Time Quants and e.
There are time units resulting from the synchronised world word at 360am and also from the ten sub divisions on my clock. The ten sub divisions start at 36 and increase to 360. Each of these subdivions is divided by 360 units and the factors of 0.1 are called Time Quants. Each 36 is 1.2 hours and the Time Quants equal 0.003 of an hour.
There is a larger outer clock face and an inner adjustable face. When they are both aligned they show the same time but the smaller clock face can be made to synchronise the large clock face with any other Time. This is useful for beaming to other atreas.
All areas have a partial common Time factor of 360am with its own shade and Other Time Quant colours, which vary from parallelogramme to parallelogramme and throughout the universe they mingle with this universal indication of a common Time. The 360am also has a symbol which with the use of the other symbols of other areas initiates a world word.
This world word synchronises speech and models the world and universe into an aspect of oneness.
With the use of the inner clock face ratios can be de-synchronized and volume and space/area can be gained by associating it to other time areas. Vocal units per hour also help in expanding Space/area with among other things their effect on gravity.
Using the above infomation we can expand the 4 to 6 while keeping the 2 and offering further relations to be made against it.
The way I have devised the world clock has exactly the measurements necessary for the above operations.
This way we can successfully run the large with/against the small and make any ratioing division even and therefore, resynchronised but with different perametres. It is important that the right hand part of the ratio is divisible by two.
(see added hand written information on next post)
Immanence
Conditions possessing immanence sustain the present situation, which is anything between maximum gravity minimum gravity; maximum density and minimum density.
Immanence can be managed by my clock, which it can blanket, by using the random related circles denoted in my work. These can be connected to each other by a partially real straight line. This model is associated to the number model of spectral intakes, which behaves like a cooling pack.
Immanence is a conglomeration of all factors of my work, working as a unified whole to sustain the status quo.
We remove immanence by initiating one of my factors until it reaches outside the scope of the immanence. 0.28 seconds is the initial base ammount of time needed for initiating an alteration or withdrawal of an aspect within immancence.
Immanence means that what is going on in the praticular area of immanence is inherrently connected to all other areas and occasions
Immanence can be managed by my clock, which it can blanket, by using the random related circles denoted in my work. These can be connected to each other by a partially real straight line. This model is associated to the number model of spectral intakes, which behaves like a cooling pack.
Immanence is a conglomeration of all factors of my work, working as a unified whole to sustain the status quo.
We remove immanence by initiating one of my factors until it reaches outside the scope of the immanence. 0.28 seconds is the initial base ammount of time needed for initiating an alteration or withdrawal of an aspect within immancence.
Immanence means that what is going on in the praticular area of immanence is inherrently connected to all other areas and occasions
Abonnieren
Posts (Atom)
