The Word and Beaming

The Word and Beaming

The One Word being spoken which is mentioned in “More on the Word and Beaming”

of 27.11. 2013 is an utterance which involves the power within one parallelogram (pg) on my world map and its related information square (see blog) and this pg draws in with angle arms i.e. geometrically the same single unified word element from each other pg. The pg`s can be transposed.

The pg from which an object is being beamed fitsTime wise according to my clock with the moment of beaming or any fictional time of beaming (see blog on creating an induced time of day).

Each pg has access to the info contained in any other pg. This factor is recquired when using the information from other pg 's across which an object is being beamed and of course from the pg of desired destination. 

The Potential of Time Volume

The Potential of Time Volume

If the 13 year Time process, as mentioned in recent posts, would continue in a near vacuum i.e. in vacated areas around objects it could be used to 'expand' the areas around sections of bcc conglomerates.

Time Volume can expand the borders of Raum as well as time generally can become material and visa versa.

The above would also apply to the area around individual physical aspects of events.

I have made an attempt in my work to outline laws which relate to the above concerning gravity and mass and position adjustment, especially when beaming an object past the molecules in the obstacle.

Bending in Outer Space

Bending in Outer Space

Any bending of area in outer space caused through Time, Gravity or Density extremes or by multi-dimensional interference when going further than the position of the boxes mentioned to the border of the universe, is basically instructed by the factor of potential pouring past the 'on' particles (see blog). However, the areas affected by the above aspects do follow certain rules i.e.

A weight of 20.000 tons consisting of up to 10 to the power of 7 bcc´s, whether they are gaseous or bridging a void, or are mainly substance, create an area of up to 12 Billion tons of reality. There are seven reality buds to a ton of reality.

When considering the term reality I am including time-volume, the Raum factors within a near void and the energetic Time and angle factors related to the changing of position of elements within an area, also the comprehension potential of the viewer including her individual omnipresence etc. (see blog).

Finding an average here, i.e., aligning the elements of the measurements which apply to such areas of outer space, as mentioned, with grade and nature of the bending would assist in the creation of a reality frame to cover the area. (see blog).

Aligned averages would also be basic statistics useful for overcoming space i.e. distance. 

Triangles and Reality

Triangles and Reality

Each angle of an even angled triangle is theoretically 90°. It has a proportional deduction of reality capacity enclosed within its angles, according to the laws of the number, position and chemical composition of the bcc´s of objects surrounding it. This larger reality concept is depicted by a square which encloses the triangle.

See here: visual scope and angular limits and aiming of vision voltage. See also the electrical contents of spectral intakes involved in perception and senses and notes on successive squares portraying reality.

The proportion of reality deducted by the use of even angled triangles is relative to any information square (see blog) containing its individual information and which relates to the topic of the triangle. These dictate through colour a controlled view of reality, which fits into his or her symetrical angular degree of comprehending (Auffassung)

The counts are three information squares, which can be issued in simplified form to one 60° I.e 90° angle. One sees here also the relationship of a moving point to a restrictive border and thus an extending sequential lineal calculation as can perhaps be seen in a propelled hydrogen atom (the nature of which can perhaps be simulated) and during take off of a spaceship prior to entry into 60° or flight dimension.

However, the point where breaking the border takes place is relevant as this relates time to distance. A point of 0.2° from any second one of my smallest time units equals any information square U. See work for relevance of U in my parallelograms.

Among other things, the information in info square U is 6 inches along a flight line, and is depicted as below No.1 when orientating oneself in outer space with the diamond locator (see blog).

The diamond locator follows a plan of the universe, but this is indicated by fixing a desired area in its centre point within 3000 billion miles cubed of any other point and within this centre an orientation as described above can be made.

A point breaking the boundary at see No.2 below I.e the x is suitable for beaming and space flight. Both involve dimensional manouvering and the correct directional assessment is necessary as this necessarily involves time and spatial and gravitational differences.

In beaming which, at the moment just involves earth realms, the subject adapts to gradations measuring the revolutions of the planet. These measurements where beaming is concerned start at the dividing line in America, as depicted in earlier posts. Also involved in beaming where direction and breaking a triangular boundary is concerned is the 6inch cushion at the surface of the earth and its reaction to influences from within the universe. The main influences from outer space registered within this cushion are gravitational influences especially those of during a past time and functional time I.e the natural passing of time and how these fractions of the One Time are contained within the said cushion.

No.1

No.2

Orientation in the Unsiverse

Orientation in the Unsiverse

In defining the whole area of the universe and for the sake of orientation within it, I have sectionalized it as No.1 below. Such a depiction of upper and lower parts of the universe may seem simplistic but I hope it serves the purpose i.e. of orientation.

If I describe an area of 1.6 of each 2,4,5 section of the 'upper' area of the universe, I would be indicating the whole of square one and 0.6 of its adjoining boxes. This would be the maximum distance depicted in previous posts of 3000 billion, trillion, trillion square miles. One also sees here that width or sideways intention is, at least, spatially unlimited.

By writing that the calculations relate to all of the initial square, i.e. square one and 0.6 of the adjoining squares one gets a more involved impression of an area. However, I am drawing on a flat two dimensional equivalent picture of the universe with a left and right and up and down. This initially seems unavoidable. I am also pinpointing an area of the universe in my mind which lies in an upper left part of the universe if it could be so depicted. It is however really middle right.

I am indicating that the initial assessment or fundamental point or moment of the specific desired destination is within the one i.e. the top left square and its radius.

The latter is an area of spatial and temporal assessment of being within proceeding and preceeding posed positions. The radial curve seen and assessed by earth dimensions is however at 0.25 of the adjoining squares. This is if the destination is 3000 billion, trillion, trillion miles from earth. This makes the identifiable point 1.25 of the upper left part.

The difference of 0.35 involves the spatial bending and curving in outer space at that position and within a surrounding area which is relativsed to it´s distance to earth i.e. 6:1.

The differing 0.35 is a result of vision voltage and other sense comprehension factors. The difference also has the expansion rate of the universe as well as gravitation factors prevalent in the identified area calculated into it.

After defining any area within space using the box system, the diamond locator (dl) is then used in order to define exactly the desired point wanted. As mentioned in previous posts the centre of the dl fixes on a certain point and one of the A,B,C quarters or the dl have within them the desired area or place aimed for. The point the dl fixes on involves the actual destination and the A,B,C quarters relate to the same point having calculated time and gravity factors within them, especially those involved in hostile areas.

It brings a desired location to the front in respect of the depth indicated by any set of successive squares or in fact as indicated by the dl itself. Of course we are often dealing with a new depth dimension (see blog).

Each square is usually at the above maximum distance and has a rate of increase in size of 3.02 inches per trillion miles, which is its related size to the expanding universe.

Each square in the set of orientation boxes is a maximum of one string and therefore has the said maximum assessment. However, because of Raum variances at that distance, the universe is measured in depth expansion, i.e., by successive square frames, which succeed the original depicted squares.

This is similar as I have outlined previously to depicting reality generally. However, in such circumstances as depicted above further depth (distance) squares are extended to the left of each square in an unlimited fashion.

This last point is calculated knit in with the calculations of the massive gravity of the potential within the 'Nothing' beyond the borders of our expanding universe (see early post).

To return to the difference between the 0.6 and 0.25 as mentioned above concerning the orientating boxes for the universe I would say it is a distance in terms of Time. It is a constant ratioed comparison to the distance between the 'on' particles of the fractal pattern at the border of the universe, (see early post). This latter concern is described basically by my O within my 36er system, as the 'on' particles regulate the pace of the growing universe and the amount of potential that can seep past the 'on' particles from the nothing at the other side of the borders.

The distance to the border of the universe from the point of destination, which as mentioned in this case is a maximum of 3 million, trillion, trillion square miles from earth and at the said distance i.e. 6:1 to any other point at such a distance is to be ratioed in comparison to the 0.35 difference and the said expansion rate of the universe. The latter, as stated, depends on the interaction of the 'on' particles.

The difference in the proximity of the 'on' particles to each other may be minute but the Time areas which relate to any difference between the said particles is often extremly big. This is perhaps because the edge is so big and contains so many 'on' particles. Here we could see the primal relationship between big and small.

Ten degrees of bending which extend for two thirds of a circumference in any area within a trillion miles of the desired area alters the measurement between 'on' particles by one degree i.e. 0.2 cm more added to each of the adjoining boxes.

The above rules can be applied to any box in order to identify any area within the universe.

No.1

Lines and Lengths

Lines and Lengths

The length of a semi-fictional or energetic string of 1 to 36 I.e see No.1 below can be any desired length and the line can be used to represent the completed cycle of 1 to 36 i.e. No. 1 below. The length is co-ordinated with the range of digits within its related 1 to 36 (see Blog for 36er System)

However the line is represented within a second initial 1cm which when written is placed to the right of the first initial 1cm and then it equals 0.3698 cm.

No.1

Some Statistics

Some Statistics

The 0.25 to 0.6 difference is a distance in terms of Time, which is ratioed to the distance between the 'on' particles at the edges of the universe.

0 within my 36er system can be used to define the system at the edges of the universe.

Ten degrees of bending of Raum extending for a curve which is two thirds of a circumference contained within a trillion miles of desired area alters the measurement between 'on' particles by one degree i.e. 0.2 cm more added to adjoining boxes. See also recent work on one point transcending a reality limitation.

A two degree of bending of Raum extending for a curve which is two thirds of a circumference alters the measurement between 'on' particles by 0.5 degrees i.e.half a cm more added to adjoining boxes.

Reality and Successive Squares

Reality and Successive Squares

Each successive square of reality on earth and in space (see blog) is twenty metres in distance from the previous one. The angle of its variants in position behind the previous one signifies the Time involved in the evolution of each frame. The latter is also dependent on the time of day. A frame consisting of 6000 trillion realtity buds reletaivised to two foot squared depicts a journey as explained recently i.e. of a distance 6:1 from earth to position in box five. And also of an average hospital department in drab grey with two to twenty metres of surrounding free space.

The above basic measurements are connected to and can be co-ordinated with the 'on''off' character of the borders of the universe (see blog), and the potential reality seeping past them from the Nothing and being basically designed and integrated by the sound and breath of God breeze permeating the universe.

Space and Time

Space and Time

It would be very difficult to calculate the continually changing gravitational Raum and density values in all areas of space so a standard behavourial range has to be established. One from which behaviour of the above can be deduced from any Time period in which an area is being considered. We also need such a range when assessing the accessability of a desired point with regard to the parameters of its past, present and future positions.

A deduction about the flow of circumstances of an area during different epochs can be ascertained by analysing atomic behaviour, especially that of Hydrogen, within the scope of the present ten years and aligning their behaviour with that of general memory.

There is memory contained within water and contained in sound and light, relating the origin of the universe with its present state, all of which can be analysed. One can also view the universe before it was created. This can be done through gravity and Raum and Time-Volume calculations in present nows. This would a sort of geometrical relationship scheme which would enable us to shorten/overcome massive distances.

The successive nows within a ten year past behind each present would be a kind of word which can be calculated to relate to All time.

Specific Areas in Outer Space

Specific Areas in Outer Space

An 0.4928 cm line posed at angle of NSW 123.528° indicates a 'physical' length of 3 Nanometres. These calculations indicate its reality potential and the Time of Day, which can be artificially induced, and give it its degree and area of effect.

The above are crystalization factors of the acutely accurate placement necessary for any said Dash. The potential of three nanometres of physicality relies for its impact on its conveyance by visual scope and other sense reactions within a subject`s omnipresence (see blog).

The above calculations are accurate and safe when regarded within my 36er system.

A maximum distance of impact of a dash when using the above calculations is 3000 billion, trillion, trillion square miles and is represented as the whole initial 1cm (See work).

This is the maximum distance anything can be assessed or realized against. 

Hydrogen Atoms and the Sun

Hydrogen Atoms and the Sun

Hydrogen atoms are affected by the sun`s rays and by the information contained within them, i.e. the mathematics of the sun. This information is also contained within the information squares (see blog) (perhaps the information squares I describe combined with the information on immortality are similar to the structures of the chambers in the pyramids).

However the information concerning the Hydrogen Atoms and their interaction with the sun`s spectrum is partially related to my numbers and their physical presentation i.e. the reality buds.

Perhaps some of the above information is contained in my heating lines too (see blog)

Hydrogen Molecules and Beaming

Hydrogen Molecules and Beaming

Hydrogen molecules play a big role in co-ordinating gravity during beaming. As mentioned energy fields through which an object is being beamed and which are created by emotions either collective or in one or two individuals and also in different national mentalities, have a weight conveyed basically on, through and with colour (see blog).

These energy fields with their gravity count can be counteracted during beaming by the use of hydrogen molecules and single hydrogen atoms. The addition of one hydrogen atom within a six metre arch between any group of bcc´s would reduce gravity to 6m per second.

The gravity would be a controlled height reduction rate of 6 meters each second. This would only occur within the six inch cushion surrounding the earth and would be relativised to it. The gathering impetus of the falling (beamed) subject would be lined up with the minute gravity counts involved in adding and deducting hydrogen atoms to the bcc´s (see work). These would interplay in order to keep emotional weight under control and for acceleration during beaming. This is because of the inherent use of gravity counts in respect of acceleration and further to sound and distance and therefore to Raum.

The acceleration resulting as above would make actual graded gravity inactive. However as there is an element of staticity involved, especially in the condensing of time, the object does have a semi fictional aspect. This semi fictional aspect has already been explained. However it is also partially created by the angular visual scope energy direction and as mentioned in earlier posts by the electrical perceptual and sense energy involved in the word relinqurishment.

Referring back to the six metre arc, this would contain time-volume. The time-volume could create an enlargement of time but also diminish time within the arch to an average of the new gravity count divided against any amount of my smallest time units up to and including 6. Here we have the O i.e. six infinity Nothing (see my 36er System) which relate to the weight of one hydrogen atom, thus to the origin of the universe and the One Time potential of all past time.

The above is an exercise in employing time-volume. The six metre arch of Raum involved remains but its time of involvement in any transition can be almost non- existent.

Also this minimal time involvement when encountering spaces is partially due to viewing reality as successive flat two dimensional planes at a 2° angle behind each other. One is not involved here in Raum, but in paper thin 'pictures' which are permanently being permeated.

 

Dimensional Borders and Space Flight

Dimensional Borders and Space Flight

The sun`s spectrum dictates the Ebene of the point of break through through the limiting perspective or border. And as mentioned in early posts a 14 degree or 23 to 24 degree ascent for space flight is desirable. This depends on the time of day. The change of time of day can be artificially determined (see blog), partially by understanding and shuffling the colours of the spectrum at the outer border of the six inch cushion around the earth mentioned in recent work.