The Word and Beaming

The Word and Beaming

The One Word being spoken which is mentioned in “More on the Word and Beaming”

of 27.11. 2013 is an utterance which involves the power within one parallelogram (pg) on my world map and its related information square (see blog) and this pg draws in with angle arms i.e. geometrically the same single unified word element from each other pg. The pg`s can be transposed.

The pg from which an object is being beamed fitsTime wise according to my clock with the moment of beaming or any fictional time of beaming (see blog on creating an induced time of day).

Each pg has access to the info contained in any other pg. This factor is recquired when using the information from other pg 's across which an object is being beamed and of course from the pg of desired destination. 

The Potential of Time Volume

The Potential of Time Volume

If the 13 year Time process, as mentioned in recent posts, would continue in a near vacuum i.e. in vacated areas around objects it could be used to 'expand' the areas around sections of bcc conglomerates.

Time Volume can expand the borders of Raum as well as time generally can become material and visa versa.

The above would also apply to the area around individual physical aspects of events.

I have made an attempt in my work to outline laws which relate to the above concerning gravity and mass and position adjustment, especially when beaming an object past the molecules in the obstacle.

Bending in Outer Space

Bending in Outer Space

Any bending of area in outer space caused through Time, Gravity or Density extremes or by multi-dimensional interference when going further than the position of the boxes mentioned to the border of the universe, is basically instructed by the factor of potential pouring past the 'on' particles (see blog). However, the areas affected by the above aspects do follow certain rules i.e.

A weight of 20.000 tons consisting of up to 10 to the power of 7 bcc´s, whether they are gaseous or bridging a void, or are mainly substance, create an area of up to 12 Billion tons of reality. There are seven reality buds to a ton of reality.

When considering the term reality I am including time-volume, the Raum factors within a near void and the energetic Time and angle factors related to the changing of position of elements within an area, also the comprehension potential of the viewer including her individual omnipresence etc. (see blog).

Finding an average here, i.e., aligning the elements of the measurements which apply to such areas of outer space, as mentioned, with grade and nature of the bending would assist in the creation of a reality frame to cover the area. (see blog).

Aligned averages would also be basic statistics useful for overcoming space i.e. distance. 

Triangles and Reality

Triangles and Reality

Each angle of an even angled triangle is theoretically 90°. It has a proportional deduction of reality capacity enclosed within its angles, according to the laws of the number, position and chemical composition of the bcc´s of objects surrounding it. This larger reality concept is depicted by a square which encloses the triangle.

See here: visual scope and angular limits and aiming of vision voltage. See also the electrical contents of spectral intakes involved in perception and senses and notes on successive squares portraying reality.

The proportion of reality deducted by the use of even angled triangles is relative to any information square (see blog) containing its individual information and which relates to the topic of the triangle. These dictate through colour a controlled view of reality, which fits into his or her symetrical angular degree of comprehending (Auffassung)

The counts are three information squares, which can be issued in simplified form to one 60° I.e 90° angle. One sees here also the relationship of a moving point to a restrictive border and thus an extending sequential lineal calculation as can perhaps be seen in a propelled hydrogen atom (the nature of which can perhaps be simulated) and during take off of a spaceship prior to entry into 60° or flight dimension.

However, the point where breaking the border takes place is relevant as this relates time to distance. A point of 0.2° from any second one of my smallest time units equals any information square U. See work for relevance of U in my parallelograms.

Among other things, the information in info square U is 6 inches along a flight line, and is depicted as below No.1 when orientating oneself in outer space with the diamond locator (see blog).

The diamond locator follows a plan of the universe, but this is indicated by fixing a desired area in its centre point within 3000 billion miles cubed of any other point and within this centre an orientation as described above can be made.

A point breaking the boundary at see No.2 below I.e the x is suitable for beaming and space flight. Both involve dimensional manouvering and the correct directional assessment is necessary as this necessarily involves time and spatial and gravitational differences.

In beaming which, at the moment just involves earth realms, the subject adapts to gradations measuring the revolutions of the planet. These measurements where beaming is concerned start at the dividing line in America, as depicted in earlier posts. Also involved in beaming where direction and breaking a triangular boundary is concerned is the 6inch cushion at the surface of the earth and its reaction to influences from within the universe. The main influences from outer space registered within this cushion are gravitational influences especially those of during a past time and functional time I.e the natural passing of time and how these fractions of the One Time are contained within the said cushion.

No.1

No.2

Orientation in the Unsiverse

Orientation in the Unsiverse

In defining the whole area of the universe and for the sake of orientation within it, I have sectionalized it as No.1 below. Such a depiction of upper and lower parts of the universe may seem simplistic but I hope it serves the purpose i.e. of orientation.

If I describe an area of 1.6 of each 2,4,5 section of the 'upper' area of the universe, I would be indicating the whole of square one and 0.6 of its adjoining boxes. This would be the maximum distance depicted in previous posts of 3000 billion, trillion, trillion square miles. One also sees here that width or sideways intention is, at least, spatially unlimited.

By writing that the calculations relate to all of the initial square, i.e. square one and 0.6 of the adjoining squares one gets a more involved impression of an area. However, I am drawing on a flat two dimensional equivalent picture of the universe with a left and right and up and down. This initially seems unavoidable. I am also pinpointing an area of the universe in my mind which lies in an upper left part of the universe if it could be so depicted. It is however really middle right.

I am indicating that the initial assessment or fundamental point or moment of the specific desired destination is within the one i.e. the top left square and its radius.

The latter is an area of spatial and temporal assessment of being within proceeding and preceeding posed positions. The radial curve seen and assessed by earth dimensions is however at 0.25 of the adjoining squares. This is if the destination is 3000 billion, trillion, trillion miles from earth. This makes the identifiable point 1.25 of the upper left part.

The difference of 0.35 involves the spatial bending and curving in outer space at that position and within a surrounding area which is relativsed to it´s distance to earth i.e. 6:1.

The differing 0.35 is a result of vision voltage and other sense comprehension factors. The difference also has the expansion rate of the universe as well as gravitation factors prevalent in the identified area calculated into it.

After defining any area within space using the box system, the diamond locator (dl) is then used in order to define exactly the desired point wanted. As mentioned in previous posts the centre of the dl fixes on a certain point and one of the A,B,C quarters or the dl have within them the desired area or place aimed for. The point the dl fixes on involves the actual destination and the A,B,C quarters relate to the same point having calculated time and gravity factors within them, especially those involved in hostile areas.

It brings a desired location to the front in respect of the depth indicated by any set of successive squares or in fact as indicated by the dl itself. Of course we are often dealing with a new depth dimension (see blog).

Each square is usually at the above maximum distance and has a rate of increase in size of 3.02 inches per trillion miles, which is its related size to the expanding universe.

Each square in the set of orientation boxes is a maximum of one string and therefore has the said maximum assessment. However, because of Raum variances at that distance, the universe is measured in depth expansion, i.e., by successive square frames, which succeed the original depicted squares.

This is similar as I have outlined previously to depicting reality generally. However, in such circumstances as depicted above further depth (distance) squares are extended to the left of each square in an unlimited fashion.

This last point is calculated knit in with the calculations of the massive gravity of the potential within the 'Nothing' beyond the borders of our expanding universe (see early post).

To return to the difference between the 0.6 and 0.25 as mentioned above concerning the orientating boxes for the universe I would say it is a distance in terms of Time. It is a constant ratioed comparison to the distance between the 'on' particles of the fractal pattern at the border of the universe, (see early post). This latter concern is described basically by my O within my 36er system, as the 'on' particles regulate the pace of the growing universe and the amount of potential that can seep past the 'on' particles from the nothing at the other side of the borders.

The distance to the border of the universe from the point of destination, which as mentioned in this case is a maximum of 3 million, trillion, trillion square miles from earth and at the said distance i.e. 6:1 to any other point at such a distance is to be ratioed in comparison to the 0.35 difference and the said expansion rate of the universe. The latter, as stated, depends on the interaction of the 'on' particles.

The difference in the proximity of the 'on' particles to each other may be minute but the Time areas which relate to any difference between the said particles is often extremly big. This is perhaps because the edge is so big and contains so many 'on' particles. Here we could see the primal relationship between big and small.

Ten degrees of bending which extend for two thirds of a circumference in any area within a trillion miles of the desired area alters the measurement between 'on' particles by one degree i.e. 0.2 cm more added to each of the adjoining boxes.

The above rules can be applied to any box in order to identify any area within the universe.

No.1

Lines and Lengths

Lines and Lengths

The length of a semi-fictional or energetic string of 1 to 36 I.e see No.1 below can be any desired length and the line can be used to represent the completed cycle of 1 to 36 i.e. No. 1 below. The length is co-ordinated with the range of digits within its related 1 to 36 (see Blog for 36er System)

However the line is represented within a second initial 1cm which when written is placed to the right of the first initial 1cm and then it equals 0.3698 cm.

No.1

Some Statistics

Some Statistics

The 0.25 to 0.6 difference is a distance in terms of Time, which is ratioed to the distance between the 'on' particles at the edges of the universe.

0 within my 36er system can be used to define the system at the edges of the universe.

Ten degrees of bending of Raum extending for a curve which is two thirds of a circumference contained within a trillion miles of desired area alters the measurement between 'on' particles by one degree i.e. 0.2 cm more added to adjoining boxes. See also recent work on one point transcending a reality limitation.

A two degree of bending of Raum extending for a curve which is two thirds of a circumference alters the measurement between 'on' particles by 0.5 degrees i.e.half a cm more added to adjoining boxes.

Reality and Successive Squares

Reality and Successive Squares

Each successive square of reality on earth and in space (see blog) is twenty metres in distance from the previous one. The angle of its variants in position behind the previous one signifies the Time involved in the evolution of each frame. The latter is also dependent on the time of day. A frame consisting of 6000 trillion realtity buds reletaivised to two foot squared depicts a journey as explained recently i.e. of a distance 6:1 from earth to position in box five. And also of an average hospital department in drab grey with two to twenty metres of surrounding free space.

The above basic measurements are connected to and can be co-ordinated with the 'on''off' character of the borders of the universe (see blog), and the potential reality seeping past them from the Nothing and being basically designed and integrated by the sound and breath of God breeze permeating the universe.

Space and Time

Space and Time

It would be very difficult to calculate the continually changing gravitational Raum and density values in all areas of space so a standard behavourial range has to be established. One from which behaviour of the above can be deduced from any Time period in which an area is being considered. We also need such a range when assessing the accessability of a desired point with regard to the parameters of its past, present and future positions.

A deduction about the flow of circumstances of an area during different epochs can be ascertained by analysing atomic behaviour, especially that of Hydrogen, within the scope of the present ten years and aligning their behaviour with that of general memory.

There is memory contained within water and contained in sound and light, relating the origin of the universe with its present state, all of which can be analysed. One can also view the universe before it was created. This can be done through gravity and Raum and Time-Volume calculations in present nows. This would a sort of geometrical relationship scheme which would enable us to shorten/overcome massive distances.

The successive nows within a ten year past behind each present would be a kind of word which can be calculated to relate to All time.

Specific Areas in Outer Space

Specific Areas in Outer Space

An 0.4928 cm line posed at angle of NSW 123.528° indicates a 'physical' length of 3 Nanometres. These calculations indicate its reality potential and the Time of Day, which can be artificially induced, and give it its degree and area of effect.

The above are crystalization factors of the acutely accurate placement necessary for any said Dash. The potential of three nanometres of physicality relies for its impact on its conveyance by visual scope and other sense reactions within a subject`s omnipresence (see blog).

The above calculations are accurate and safe when regarded within my 36er system.

A maximum distance of impact of a dash when using the above calculations is 3000 billion, trillion, trillion square miles and is represented as the whole initial 1cm (See work).

This is the maximum distance anything can be assessed or realized against. 

Hydrogen Atoms and the Sun

Hydrogen Atoms and the Sun

Hydrogen atoms are affected by the sun`s rays and by the information contained within them, i.e. the mathematics of the sun. This information is also contained within the information squares (see blog) (perhaps the information squares I describe combined with the information on immortality are similar to the structures of the chambers in the pyramids).

However the information concerning the Hydrogen Atoms and their interaction with the sun`s spectrum is partially related to my numbers and their physical presentation i.e. the reality buds.

Perhaps some of the above information is contained in my heating lines too (see blog)

Hydrogen Molecules and Beaming

Hydrogen Molecules and Beaming

Hydrogen molecules play a big role in co-ordinating gravity during beaming. As mentioned energy fields through which an object is being beamed and which are created by emotions either collective or in one or two individuals and also in different national mentalities, have a weight conveyed basically on, through and with colour (see blog).

These energy fields with their gravity count can be counteracted during beaming by the use of hydrogen molecules and single hydrogen atoms. The addition of one hydrogen atom within a six metre arch between any group of bcc´s would reduce gravity to 6m per second.

The gravity would be a controlled height reduction rate of 6 meters each second. This would only occur within the six inch cushion surrounding the earth and would be relativised to it. The gathering impetus of the falling (beamed) subject would be lined up with the minute gravity counts involved in adding and deducting hydrogen atoms to the bcc´s (see work). These would interplay in order to keep emotional weight under control and for acceleration during beaming. This is because of the inherent use of gravity counts in respect of acceleration and further to sound and distance and therefore to Raum.

The acceleration resulting as above would make actual graded gravity inactive. However as there is an element of staticity involved, especially in the condensing of time, the object does have a semi fictional aspect. This semi fictional aspect has already been explained. However it is also partially created by the angular visual scope energy direction and as mentioned in earlier posts by the electrical perceptual and sense energy involved in the word relinqurishment.

Referring back to the six metre arc, this would contain time-volume. The time-volume could create an enlargement of time but also diminish time within the arch to an average of the new gravity count divided against any amount of my smallest time units up to and including 6. Here we have the O i.e. six infinity Nothing (see my 36er System) which relate to the weight of one hydrogen atom, thus to the origin of the universe and the One Time potential of all past time.

The above is an exercise in employing time-volume. The six metre arch of Raum involved remains but its time of involvement in any transition can be almost non- existent.

Also this minimal time involvement when encountering spaces is partially due to viewing reality as successive flat two dimensional planes at a 2° angle behind each other. One is not involved here in Raum, but in paper thin 'pictures' which are permanently being permeated.

 

Dimensional Borders and Space Flight

Dimensional Borders and Space Flight

The sun`s spectrum dictates the Ebene of the point of break through through the limiting perspective or border. And as mentioned in early posts a 14 degree or 23 to 24 degree ascent for space flight is desirable. This depends on the time of day. The change of time of day can be artificially determined (see blog), partially by understanding and shuffling the colours of the spectrum at the outer border of the six inch cushion around the earth mentioned in recent work. 

Reality and Visual Scope

Reality and Visual Scope

As already mentioned it is helpful when viewing and categorizing reality to construct it as successive two dimensional oblong or square frames and add its three dimensional potential (reality) using visual scope counts.

The above partially outlines the way large physical objects can be transplanted as would be useful when encountering hazards in outer space. ( See past posts)

More on the Word and Beaming

More on the Word and Beaming

The word of the beaming journey resulting from the letter content of each parallelogram used (see Blog) synchronizes with the one word which is spoken throughout the world (at the time of beaming) i.e. it is coordinated by all the parallelograms and results in accomplishment of journey.

Time and Beaming

Time and Beaming

Going from a point of origin of maximum density mentioned in my work we can guage

the gravity and density de-synchronization needed to match Time issues involved in Beaming (see work). When matched with immense Time-Volumes these gravitational differences become extremely small and for consistency when Beaming, factors like the dimensional and emotional weights and mentality differences have to be assessed within the gravitational calculations made. However, these factors could be accounted for by light nodes working within the crucial six inches (see blog) above the surface of the earth.

Time-Volume and Raum

Time-Volume and Raum

The ratios of Time-Volume to Raum vary according to the degree of vacuum i.e. the absence or presence of matter within an area of Raum. In most of my work I present a standard measurement of Raum of 12 inches squared against which ratios can be built.

An area of Raum related to the substance it contains and then how Time-Volume can be employed within it follow strict relations. ( I think I have outlined a basic relation).

One has to remember here too sound and its potential as a universal conveyancing medium.

The amount of Time-Volume engaged since about the 17th of August 2013 – a date which instigated the ten year span was condensed into about 2.5 weeks and there was considerable basic chemical compound density resulting in general matter present within the whole area. The area was perhaps local, but at the conclusion of the span there was also an indication of the universal one Time needed for space travel and for certain aspects of beaming. ( See work).

However, there would be a difference in ratio in wide open spaces and with only a natural conglomeration such as the ground to contend with, plus observer. (An observer would have energy potential) interacting with potential amount of basic chemical compounds, especially those of feelings reacting to sounds and of visual scope counts – all of which may amount to intent or to some form of manifestation.

I have outlined some of the laws within colour and its gravitational potential in earlier posts.

When assessing the Time-Volume relation to Raum within Earth realms, many things have to be taken into consideration – a ten year span can only be condensed to 2.5 weeks because the 12 inch squared concept of area remains flexible and an organised shortening of distance between objects takes place. One inch of shortening of distance between each set of 6 basic chemical compound groups equals one year. This one year builds part of a second frame which is 2° to the right behind the first frame. This successfully draws each bcc from within its group to two inches apart. Each of these spaces mentioned above are now filled by pyramid shaped Time-Volume units. The units are categorized into specific usable units by comparing them to light. Perhaps as suggested units as my light scale units (see Blog).

Time-Volume is developed by carefully designed lines. See my lines their make up and usage.

However in outer space where a near vacuum can be present, the Time-Volume relation changes according to one of the formulas I have written. Also there are further calculations that three bcc's within a ten meter distance from each other and a radius of 10.5 miles have a Time-Volume potential of a billion years. Condensed to earth experience this would be two Gregorian months and six days.

The billion Gregorian years of Time-Volume available radiates evenly throughout the 10.5 mile radius. To indicate depth and other dimensional uses of these facts I would say here that the core can be both the ten metre distance around three bcc's, each core with the 10.5 mile radius, and each bcc within a 10 m distance to each other or around one of the bcc's with the 10 m distance around it, and this with the said radius of 10.5 miles.

The resulting gravitational frequencies would set a precedent for beaming and other dimensional adventures (see as a lead my formula on sound and light). The gravitational differences would indicate time lines and portals to otherwise unknown areas of existence.

These rules can be allied with the digital 1.1-1.2 multidimensional access information, some of which is outlined in my work. The above rules deepen the 0.1 value when it relates to the 1.1-1.2 and brings all three aspects to their next stage when considering multidimensional investigation. Especially as the 1.1-1.2 and the 0.1each have a 10.5. mile radius associated to them.

The 10.5 mile radius is the facilitating element which allows for alignment with information square three and parallelogram U (see Blog) and this is a standard for aligning with other parallelograms and their info square coordinates. It is the smallest area in space which can be aligned to any parallelogram and acts as a base for further calculations.

Time and Matter

Time and Matter

A short line measuring 0.5382 cm indicating 3 Nano meters is a representation of matter within the mentioned time Ebene reached through the given statistics. It shows the semi-fictional state which applies to the Time Ebene indicated by the statistics. It can be drawn in carefully chosen directions.

It is the basic matter calculation within the Time Ebene and a basic unit i.e. 0.5382 cm alluding to three consecutive 36's i.e. see No.1 below (the 36s depicted below should be next to each other and considerably smaller). Its length and position consume three Nano Meters within the other Time Ebene and also within four Dimensional comprehension.

The three Nano Meters in the other Time Ebene react in line with the 1.209 cm dash mentioned in recent posts. I hope to explain this in more depth.

At the moment I can say they coordinate through the initial 1cm (see Blog) and through this to the different Time light and density to distance amounts within different Ebenen and dimensions.

These can chiefly be seen by the differing amounts within the completed 36s shown.

These 36s relate to various factors as has been seen in previous work and by 
now a deduction as to different relevances can be ascertained.
(The 36s should be next to each other. Will be next week....)

Raum Representation

Raum Representation

Most Raum quantaties are scaled down or are represented by 12 inch squared frames suitable for computer representation. However, as mentioned, these frames are in many cases successive with up to 20 per section of the size group which they represent.

The picture I drew of Time squared in relation to Raum can be applied to the above as a deductive initiative. 

Dashes

Dashes

The length of the dash mentioned in “collective Emotion”, etc. is 3/8 the size of the

bottom line of a third 36 i.e. see No.1 below, when the first two 36s are squared (as depicted). (Illustrations such as dashes are necessary when quantifying an aspect of reality by making indentations in the carrier ether or mutual medium and bringing a Divine impulse into a particular structural pattern).

The amount mentioned in the article contains the distance involved as indicated by the sum of the mentioned 36s, as it relates to a flexible aspect of a 36 , or to a line, or to lineally co-ordinating, Nothing, Infinity or six i.e. the O aspect of the 36er system ( see No.2 below) with other factors such as light and ageing etc. I have already tried to explain ratios where one part increases in relation to the other part (see blog).

Further, to enlarge on what was mentioned in the article referred to, I would mention that the distance of a completing Time-span indicating a Time-Volume of three years (i.e. a landing Time span) after overlapping a previous span for three seconds is the same as for and includes the 10 year Time-Volume span, i.e. circuiting any 36 diagrammatically i.e. see No.3 below. As yet I can only explain this in that it harmonises events and this three year circuiting automatically completes a 10 year Time-Volume span.

The size and direction of the dash and the other quantities given are a base from which other diagrammatical conjectures can be created for the purposes of beaming, heating, air conditioning, genetical transformation and flight lines in outer-space, which I have often denoted in line or pattern form.

However, dashes and lines may still be and still remain a result merely of timing and poetical inspiration. But let´s try.It can be said then that the dash quantifies/substantiates the whole 13 year Time-Volume measurement mentioned in the article.

                                              No.1

No.2

                                                      No.3

Information Square Three

Information Square Three

So Information Square Three involving 1.209 cm written in any direction denotes an average three year span, providing this span overlaps for three seconds any previous time conglomerate which it also statisticially integrates.

Collective Emotion and Time-Volume

Collective Emotion and Time-Volume

A 1.209 cm dash simulating being written with an HB pencil, is the length in substantiated (physical) form of the 3 year Time-Volume energy span which ended around the 18^th September 2013, after starting two weeks earlier.

The measurement/power of this span started three seconds (translate into my smallest Time measurements) before the end of the previous ten year Time-Volume energy span which started about the 20^th August 2013. The ten year span and its 3 year conclusion involved the area/distance around any 36 i.e. see picture No.1 below.

Both spans contained the collective emotion of grief with the ensuing one involving a 60% graded increase in light. Both contain the Time-Space adjustment involved as a start to describing the potential use of such an element, one can begin by stating that the relevant information is stored in information square three (I have already written some information pertaining to information squares. Information square 3 like all other information squares hitherto mentioned contains digitalised information which involves arranged computerised animated pixels which include the programming of visual scope. Information square three pertains to earth parallelograms P and U., (see blog).

p/gram P has an elevation of its upper arm of 40°, when aligning with any other p/gram or with its associated area in outer space and P/gram U has an elevation of 20° when considering the same form of aligning.

There are several P parallelograms on the world map and to a lesser extent U p/grams. When employing the transactional information in the mentioned p/grams on the world map they are usually grouped within an upturned kidney shaped area which extends from a little above the equator to very far south. The p/grams mentioned, as do all others, co-ordinate with areas in outer space, connecting and unifying associated areas (see blog)

The other information contained in information square three is a digitalised description/portrayal of my diagram depicting maximum to minimum density throughout the universe.

 No.1

The Picture and its Analyisis

The picture should be sectioned into about 1.5 “ (inch) squares and these, i.e. the square value and its contents should be given equivalents in my 36er System.

I now have initial quantities as guidelines, see recent post referring to drawn shapes.

The lines of the squares should be broken and in a way symbolise information tokens of a fiver system computer (program), (see blog), and also illustrate flexible `pixels`.

The equivalents in the 36er system can then be given Time sequels referring to my clock and thus the word, letter and colour energies and positions related to my parallelograms and from there the related information squares and referred areas within the universe with their associated basic chemical content counts and vacuum related gravity counts.

Basic Chemical Compounds (bcc´s)

By using the term basic chemical compounds (bcc´s) I am also trying to define scientifically my reality or gravity buds. The bcc would be the basic model from which the whole is constructed. However these bcc´s would each have to be generally representative of all the chemical compounds making up the object in weight and density etc., i.e. of each other. This norm or average is attained by studying the factors illustrated in my definitions of reality or gravity buds. These inherent factors within bcc´s give them a standard or point of origin which makes the bcc´s accessible and they become manouverable by light and other factors mentioned making up the basic gravity or reality buds. The reality buds infuse the bcc´s with a divine influence which makes them a complete indivisable unit suitable for planning the physics of the future.

They become natural units above the atomic level which obey the laws attained by vision and the senses and react to and follow common sense. Things like light and time are divine gifts. Also the breath of god permeating the universe is a divine gift. These are to an extent now at our disposal, providing we don´t ruin them and ourselves by continually searching amongst sub atomic realms.

Each of the bcc´s have an average metred into them as they are identifiable by the material non-material medium of numbers. Understanding and balancing the dancing units instilled into objects also makes the average mentioned above decipherable. The numbers within an object are also of a divine nature in that they contain the musical quality in light. This latter aspect is now at our disposal in things like my bio units, i.e., interchangeable strings of numbers. The bio units link my words and their association with my 36er System and a 'solid' form of mathematics.

One could persuade these enriched bcc´s to part from each other by using the bio units as they are mentioned in work, i.e., by projecting reorganising

music into the object as the beamed subject moves forward and/or projecting innate magnets into groups of them so that the natural attraction is balanced and therefore they become manouvarable.

Once the beamed subject has passed through the ten foot gaps the ordered light- music of the bio unit and the withdrawal of the innate magnetism causes a normal cohesion. 

Time and Beaming

Time and Beaming

Going from a point of origin of maximum density mentioned in my work we can guage

the gravity and density de-synchronization needed to match Time issues involved in Beaming (see work). When matched with immense Time-Volumes these gravitational differences become extremely small and for consistency when Beaming, factors like the dimensional and emotional weights and mentality differences have to be assessed within the gravitational calculations made. However, these factors could be accounted for by light nodes working within the crucial six inches (see blog) above the surface of the earth.

Safety in Technology

Following a science/technology which is based on counter intuitive basic elements is very dangerous and it is possibly leading to the fact that humans have lost the basic instinct of any life form that of survival. They seem
to be acting as irrationally as the technology that they are propounding and using.

A system like mine, see blog, Glynworld, would possibly reverse this dangerous trend. Especially the five alternative computer system and the employment of reality buds i.e. a divine smallest unit used in the way mentioned in the blog, as these would revert us to a more wholseome type of technology/physics and future.

Aligning Elements

Dividing mass, gravity and Light each between one to ten then each division with ten subdivisions assists in their co-ordination and linking, through the 36er system, with my numbers which are, as mentioned, initial reality foundational elements.  Also  the decimal divisions are then relatable to the 1.1 to 1.2 multi dimensional access calculations.  The one to ten could be equated to Time divisions, i.e. three of my smallest Time units to one main division.

With the help of vision voltage and visual scope the divisions are also translatable through the initial one centimetre with the five stage computer language.  For details on the above see blog.

The above helps organise reality as reality is a result of the factors mass, gravity and light, with Time quant inclusions.  Through the numerical organisation of these factors computer programmes can be written enabling articles to be physically produced and beaming to take place and semi-fictional reality framaes created which surround spaceships in space.

As stated in blog understanding the mentioned elements as they manifest in speech and colour is the initial key to aligning reality, the human aspects requred for spaceflight and a technological approach to extra terrestial situations.

More on Beaming

When beaming from Deal in Kent to Laos one needs a sun line (see blog) of 28.21 cm at a 70.6° angle measured from a horizontal position.  The line, as mentioned in work, consists of seemingly randomly positioned semi animate 'pixels' - perhaps charged charcol particals, perhaps minute number(s) particals.which interact with the information given on blog and in my work on my world map.

The semi animate 'pixels' are crystaline structures which are a result of transferring the sun's rays through the brain.  This aspect of the brain can be simulated.  The 'pixels' help desynchronise gravity and mass and knock out the time factor associated to travelling to the extent mentioned in work.

As mentioned in blog the word energy involved in the word relinquishment is the first aspect in beaming.  When the destination is reached 'be' is the second aspect needed, then 'have' the third as one integrates with the new surroundings.  The words have to be specifically programmed to attain intonation covering the intention, i.e.details of distance and Time etc.

As mentioned one has skin orgasms when beaming and with the correct utilization of the number and light energy involved it can be used to heal the beamed subject, even of hereditary ailments.

First Steps in Using Human Physicality in Spaceflight

To continue my essay on the position of the heart within outer space at specific Times and in specific positions as the journey proceeds I would add that it relates to forty-five years on the life span scale.  The 45 years is denoted by the area in Time-Volume indicated in work according to the diamond locator when measuring the approach to Arieles.  The 45 years, of course, remains static throughout the permanent change in lives, Time and position (see blog).  It has an Information Square value size of twelve inches squared, which involves the informatioon in computerised semi animate form on area, Time-Volume, visual scope,. temperature, hazzard and gravity.  This information can be put into bio unit form and contained/related within the musical coding in Light.

The 45 within the 36er system is transcribed as being two measuring squares or Light widths, i.e. 1-10 plus 1-10 to the right and two down.  This relates to the above positioning with regard to its presentation by the diamond locator when depicting an area in space, and on a 12" squared computer screen.

The 45 indicated within the 36er system is a 36 symbol, a sixer symbol and then three of the initial five strokes (see blog).  These are the diagrammatical equivalents of 45, and the related area definitions within outer space.

Vision Voltage and Beaming

The vision voltage aspect mentioned in work can be used for beaming and controlling ships in space as this transmuted energy can desynchronise gravity and mass, which is a factor necessary if we are going to establish beaming in conventional physics.  I am sure vision voltage which is a transcribed sun energy can be harnessed and applied to our mobiles to facilitate beaming.

Time can be partially manipulated which is also necessary for beaming, by understanding the musical quality in light, (see blog) especially using my information on Light and my scale for measuring light.  When desynchronising mass and gravity I would recommend a one to three ratio continually exchanging between both factors and the time and other factors allowed for beaming as mentioned in work  regulated to match this.

Human physicality and Spaceflight

209.364 28.30.91 with the 28.30.91 being written smaller and at half the height of the 209 364 is the bio unit representing the heart aspect within space flight or more accurately a space journey.

A bio unit is a musical expression within the decimal broken state mentioned in work and in this sense refers to a part of the body associated to a varying position within the vastness of the universe.  A bio unit thus expressed is the working power within, sight and within physical objects.  Its temporal position can be described as Q or q, which involves in this case three seconds and these three seconds relate to its transferrable spatial position of 2.839.28 squared inches, when viewed from an all important visual distance of 12 inches, and when surrounded by a  reality frame (see blog).  See work on relative size in the 60Dimension.

The transferrable positionn of the heart or bio unit as illustrated above is within stage three of a computer programme. 

I don't know if these figures are a lot of nonsense but I can't express it in any other way.  Maybe the figures in my work are accurate or maybe not.  Maybe they will just inspire someone with more mathematical knowledge than me to work out some of the ideas in my work.

The visual distance mentioned above is the distance realised by the individual's consciousness when viewing a situation or object.  This consciousness has great relevance in the individual omnipresence calculations needed for successful space travel (see blog). 12 inches is the maximum and is associated to the actual distance mentioned in my work on visual scope.  Also actual distance can be calculated and varied according to the energy in spectral intakes, causing time to vary.  The 12" vary too but both of these aspects react  seemingly indiscrimanently from each other. There is, however, an angular relationship between the units on both scales and this follows an intricate pattern of recognition, especially that of organising the relationship of time to the permanent change in the position of items of reality.

Ageing-Time and Temperature

Ageing-Time with regard to the 73 years life span aspect of spaceflight (see blog) is controlled by Temperature.  A 3° fluctuation (reduction) within the ship, resulting in a 0.75° reductionn in body temperature governs the 73 year ageing process.

This Time process runs on one level as does the many lives immortality aspect of spaceflight (see blog).  The 73 years runs repeatedly outside of ship, while the reduction in body temperature maintains a fractional ageing Time difference within the ship.

The two aspects of temperature mentioned above are carefully balanced with the temperature outside of the ship, with the minute changes mentioned controlling the temperature problems outside of the ship.

A conducting element of sound coming from within the ship which conveys the temperature control outside as it does inside the ship is recorded within the reality frame surrounding the ship and modifies the extreme temperatures of outer space.

Temperature or a certain degree of heat exists throughout the universe and heat is a form of medium within it.  Balancing this medium and initiating a condition just above inertia or a state of temperature equilibrium through sound distributing heat 'molecules' evenly creates an equilibrium of almost static ageing wihin the ship.  The sound can originate as normal human functions from within the ship.

The Relevance of My 36

The parallel Lines around the 0 in my 36, (see blog) can be given different sizes.  These indicate the different sizes of the 0 which vary according to the presence needed, up to the size of omnipresence.

The 0 in one respect relates its object, i.e. the ship to staticity/infinity (see previous post) and the length of the parallel lines outside the 0 in my digit representing 36 is used to relate the size of the presence needed with the length of each 60D phase of each journey.

The length of each 60D depth phase is dependent on the density of Time-Volume present (see details on Blog) and vacuum exsisting in an area.  Once these factors have been ascertained space (Raum) can be modified (bent or discarded), factors which help in space flight when covering enormous distances.

The ship has a relationship to infinity for the following reasons; the 0 in the 36, in this case the ship, is surrounded by parallel lines. Also the space taveller has to relate his life to the immortality aspect in  order to align 60Dwith 20D travelling (see blog) (20D, as mentioned, is the four dimensional Earth experience).  It also relates to the yes, no, more, less, maybe, five alternative computer system mentioned  and to the ethics code illustrated in work.  These give life, action, furtherance to the static state of presence shown by the 0 and to the infinity aspect and take the danger out of the immortality control.  I would mention here (that the 0 also means six and Nothing.

See work on journey to Arieles to draw relationships between the size of the 0 neeeded to co-ordinate it with different areas in the universe.

The parallel lines around the 0 are designed in size as decimal fractions relating to multiples of any 36.  They make possible the utilization of diagramme, and a universally applicable whole number and the massive potential of a broken state, i.e. fractional Time and Space.

Static Time Frames

A static Time Frame, which can involve the Person denotes infinity.  However, the individual Time frame is infinity and not the overall condition/picture it is in, i.e. that successive Time frames follow and preceed the static Time frame and that outside the walls of the Time frame there is a Time flow which can be relativised to it.  Once we percieve that things involved in the Static Time Frame are necessarily changing in relationship to each other we can associate this to their encompassing static Time frame and induce a Time flow, regulating its speed at will.

This aspect can be used in connection with the 'switch on' immortality needed to cover massive distances in space travel (see blog) and can be used to regulate the 73 years, i.e. a distance of one life span needed for a standared space journey.

The Advantages of the 36er System

It is difficult to get a relationship to things/everything with present day mathematics, especially as people claim that the amount of natural numbers is infinite.  As nothing, including Nothing is infinite, then the digits describing things can't be infinite.  They might be infinite in nature but this makes them merely hypothetical and even more estranged from substance and reality.

The fact that Nothing becomes something means that it isn't infinite.  Even God is contained.

However, my 36er system behaves differently.  Every singe item has a solid quality of One cm (i.e. the initial one cm, see blog).  Characteristics of the initial One cm, ie.of the item concerned are described by programming them basically in decimal form into the One cm.  Amounts of the thing are delineated by the succeeding digits of the 36er system, (see blog).  The fact that everything is transient and changes over Time and that each 36 is a conclusion in Time and delineation of semi-physicallity makes mathematics real, materially related on-going and not having an infinite nature.

The 36er system also facilitates Time manouverability. (see blog)

De-synchronising and Synchronising Different Factors when Considering Beaming

De-synchronising mass with gravity and bringing Time to from a quarter of the speed of light to the speed of Light helps facilitate Beaming.

Time would in this case be accelerated by running it around the lines of a border of a square or parallelogramme as the Square or Parallelogramme would be a relativised statement of the world with of course its relationmship to massive Time pockets and areas within the universe.  (see work)

This information can be applied to the linear approlach denoted physically by my lines and illustrated by 'squaring' the linear mathematics of the sun.

The lines are broken down by numbers and distances, angles and overall length when designing them for beaming.  The squares or oblongs denoting the related transformed mathematics of the sun are filled witzh the coded energy coming from the sun with regard to Light and Gtravity.

A quarter of the speed of Light is one of my smallest Time units (see blog).  The speed of light is denoted by one musical unit which is a trillionth of one of my 36 disvisions on my clock.  (see blog().  One beams within this range.

Numbers, Gravity and Change

To find the gravitational energy in the word as indicated in my work, the inherrrent power in numbers must be ascertained - in this case my numbers from one to one-hundred and one, then one-hundred and ten, along with the associations I have listed.

Three equals gravity and Light and is measured as one unit according to the Time taken to eat an average size apple.  This is one Light-gravity unit and has, as mentioned the value in three.  One ascertains the power in numbers partially by using angular relations of objects, understanding change and using visual scope.

Understanding change involves classifying objects and areas in  space in parallelopgramme form or oblong form, i.e. interpreting their energy count into evenly spread gravity buds or reality units within the alloted paralellogrammes.  These are then influenced by Light, especially the musical content of Light and can be re-arranged partiallly by the coding in Light.

Living on Other Planets

The advantage of being able tzo manifest needs by a computer programme (see early posts) is that extended space journies would be possible as supplies would be automatic.  This would be done by colour and a programme which used Light.  Once again I suggest a Light gradation of one to ten with each digit having ten gradations.  The light count would include the elements described in work.

Having landed on a planet of suitable size and density, an atmosphere would be created and the automatic oxygen supply to the body which witches and magicians can use, i.e. without inhaling and exhaling would be applied over an extended period until suitable conditions for life on the planet existed.

Related to Post 'Dienstag 11 Aug, 2011'

This system is akin to joining up words and the joining up of words is covered by the visual scope system mentioned in work.  Sending words with our vision using the same angle energy counts seen in the work on visual scope is the broadcasting method which can remove hazzards in spaceflight.

Encircling an object or hazzard using the patterning depicted in my work of random circles connected by straight lines and re-placing the object by using the energy within sight and speech would help facilitate successful space flight.

Coded Light energy, involving many of the aspects covered in my work, i.e. those of colour and word power and that of gravity and its involvement in reality would have to be chanelled through the straight line leading to the random circle.  Once again a light gradation of between one and ten with ten subdivisions to each digit would be applicable.After this volume diminuation would have to be applied.Volume diminuation involves evacuation of almost all of the Time involved in a position, i.e. eliminating a Time Frame and relating things newly to each other.