More on Destination Boxes

It is important to consider the other four functions with regard to the five functions mentioned previously as these are interlinked with the choice of distance box.

This is seen in the four functions knitting in with the differing information contained within the Distance Boxes such as gravity, density, Time, Time-volume, virtual vacuum, sound and Light variances and how these factors relate to the borders of the universe, it's rate of expansion and Raum Management.

Previous Post as Relevant Base

In reference to previous post, when planning further flights from any other position in the universe, the Guage of 2,300 trillion miles squared and the said 2 pm is a relevant base.

However, the choice of distance box out of the six indicated would help supply the different criteria involved in designing the varying journies required.

More on Distance Boxes

The Distance of 2,300 trillion miles squared is viewed as the Distance to the Distance Boxes from Earth. (I started outlining the function of the Distance Boxes in my work of about December 2012.

The Distance of 2,300 trillion miles squared involves the Time units involved in 2pm in Deal, Kent.

The above two criteria are a whole function out of a set of one to five functions needed when planning a space flight.

More on Reality and Distance

In some respects position in space is not defined as it is on Earth and the squares become 'upright' squares with minute distances between their horizontal borders, yet with all the information contained in each successive New Square regarding hazards, distance and area covered, Raum and reversal of Time taken information. The Time taken is only minutely ahead of the Time Moment Frame applying to the original horizontal base line with the point of origin upon it from which the ship came and proceeded hence towards the peak.

This procedure continues repeatedly until the ship, having virtually completed its journey emerges into four dimensional access mode.

The hitherto triangle re-encounters it's formation and widens measurably in the process. This gives an aspect of almost static change.

The consecutive peaks of the triangles are the partial set Moments of distance which together amount to the complete journey required and are a result of Visual Scope Relays.

Reality and Distance

The factors mentioned in my previous article on hydrogen and Light are relevant to my ideas on the doubling back of the arms of a triangle once the ship has reached the peak (according to the laws of Visual scope).The arms are the same in nature as the parallel lines accompanying the ship as it travels through space, ie programmed streams of information which facilitate the journey.

Upon doubling back the arms broaden to form a square, with the square ie the new upper line horizontal to the line containing the point of origin of the ship's passage towards the new peak.
There is now a considerable amount more of measured Reality involved. Reality in terms of Raum and it's related Time - the latter being an almost instantaneous functional calculation when using the concept of visual scope (see blog) and concepts such as angle of approach. (see work).

Using especially the Angle of approach and the different definitions of estimating position in space to those used when estimating position on earth, the two horizontal lines become very close/can be seen as very close, the second line having the active role in this and the square is now seen as an upright square.

I think this is what I have been saying about seeing the ship constantly passing through upright squares.

The reverting arms of the triangle have consumed a greater amount of distance than they did when the triangle was formed and the relationship to the mind when using visual scope with regard to an almost instantaneous assessment of distance, yet retaining the observer/point of origin in an initial position enables Time Taken reassessment in various forms to take place, ie marrying the new amount of distance-reality to area related Time factors and condensing them or viewing the original journey to the peak as being a future which is now in the past.

Remember, as we measure things the second line is only now fractionally behind the first line, but it has consumed vast amounts of reality while gaining that position and the Time parameters related to those amounts/positions of Reality (see work) enable the careful matching of moments needed to overcome great distances.

More on Distance Boxes

The measurements of the area(s) from the Distance Boxes, ie, the points of desired destination (see blog) to the borders of the universe depend greatly on no turn of the ship being above 45 degrees during its journey (see blog).  This enables the necessary form of objective and subjective interaction between the ship and its surrounds to take place.

This interaction involves enfolding the sections of prevailing gravity, speed, distance and expansion rates involved in the said distance and thus mastering them automatically as the travelling subject reacts to them.

The conditions in the sections mentioned above can differ according to the hour and other Time variables such as Earth Time definitions differing from Universal Time definitions perhaps due to temporary gravitational variances within them which cannot be predicted when planning a Flight (line).

Keeping within the said manoeuvre limit helps regulate these factors in that it forms the sort of interaction mentioned.

Conclusive States when considering Spacetravel

One conclusive state can be shown as being on the periphery of one full circle and relates to the reality squares mentioned in posts of 25th September this year.

The sequential information contained in the Moments on the periphery is usually only relevant to an arc on the circle, ie, a limited amount of the periphery of the circle. These reality sections which arise out of individual uniqueness and its appropriated happenings, plus the Angle of approach seen both mathematically and psychologically can be shuffled with other sets of arcs-of- moments.

The conclusive state denoted by the full periphery is related to one major 36 on my clock. The minor 36ths within the relevant major 36  relate to the Time(s) alloted to the individual events concerned in the said conclusive state and act as a link between the arcs-of-moments contained on its periphery. The minor 36ths act as a shuffling medium and are yet another precaution against inertia.

Reality Portions

objects or reality Portions described as being panels of boxes have, as illustrated in recent work, bcc counts (see work).

However, when considering these portions in alpha or Astral energetic circumstances there are spaces surrounding each of the squares.

This enables the flexi- Time and distance co-ordinates of the alpha and Astral states to be utilised in our 4D experiencing,  such as overcoming vast distances in moments.See also my work on illicitling a desired Time of Day in order to co-ordinate areas for beaming.

Orientation in the Unsiverse

Orientation in the Unsiverse

In defining the whole area of the universe and for the sake of orientation within it, I have sectionalized it as No.1 below. Such a depiction of upper and lower parts of the universe may seem simplistic but I hope it serves the purpose i.e. of orientation.

If I describe an area of 1.6 of each 2,4,5 section of the 'upper' area of the universe, I would be indicating the whole of square one and 0.6 of its adjoining boxes. This would be the maximum distance depicted in previous posts of 3000 billion, trillion, trillion square miles. One also sees here that width or sideways intention is, at least, spatially unlimited.

By writing that the calculations relate to all of the initial square, i.e. square one and 0.6 of the adjoining squares one gets a more involved impression of an area. However, I am drawing on a flat two dimensional equivalent picture of the universe with a left and right and up and down. This initially seems unavoidable. I am also pinpointing an area of the universe in my mind which lies in an upper left part of the universe if it could be so depicted. It is however really middle right.

I am indicating that the initial assessment or fundamental point or moment of the specific desired destination is within the one i.e. the top left square and its radius.

The latter is an area of spatial and temporal assessment of being within proceeding and preceeding posed positions. The radial curve seen and assessed by earth dimensions is however at 0.25 of the adjoining squares. This is if the destination is 3000 billion, trillion, trillion miles from earth. This makes the identifiable point 1.25 of the upper left part.

The difference of 0.35 involves the spatial bending and curving in outer space at that position and within a surrounding area which is relativsed to it´s distance to earth i.e. 6:1.

The differing 0.35 is a result of vision voltage and other sense comprehension factors. The difference also has the expansion rate of the universe as well as gravitation factors prevalent in the identified area calculated into it.

After defining any area within space using the box system, the diamond locator (dl) is then used in order to define exactly the desired point wanted. As mentioned in previous posts the centre of the dl fixes on a certain point and one of the A,B,C quarters or the dl have within them the desired area or place aimed for. The point the dl fixes on involves the actual destination and the A,B,C quarters relate to the same point having calculated time and gravity factors within them, especially those involved in hostile areas.

It brings a desired location to the front in respect of the depth indicated by any set of successive squares or in fact as indicated by the dl itself. Of course we are often dealing with a new depth dimension (see blog).

Each square is usually at the above maximum distance and has a rate of increase in size of 3.02 inches per trillion miles, which is its related size to the expanding universe.

Each square in the set of orientation boxes is a maximum of one string and therefore has the said maximum assessment. However, because of Raum variances at that distance, the universe is measured in depth expansion, i.e., by successive square frames, which succeed the original depicted squares.

This is similar as I have outlined previously to depicting reality generally. However, in such circumstances as depicted above further depth (distance) squares are extended to the left of each square in an unlimited fashion.

This last point is calculated knit in with the calculations of the massive gravity of the potential within the 'Nothing' beyond the borders of our expanding universe (see early post).

To return to the difference between the 0.6 and 0.25 as mentioned above concerning the orientating boxes for the universe I would say it is a distance in terms of Time. It is a constant ratioed comparison to the distance between the 'on' particles of the fractal pattern at the border of the universe, (see early post). This latter concern is described basically by my O within my 36er system, as the 'on' particles regulate the pace of the growing universe and the amount of potential that can seep past the 'on' particles from the nothing at the other side of the borders.

The distance to the border of the universe from the point of destination, which as mentioned in this case is a maximum of 3 million, trillion, trillion square miles from earth and at the said distance i.e. 6:1 to any other point at such a distance is to be ratioed in comparison to the 0.35 difference and the said expansion rate of the universe. The latter, as stated, depends on the interaction of the 'on' particles.

The difference in the proximity of the 'on' particles to each other may be minute but the Time areas which relate to any difference between the said particles is often extremly big. This is perhaps because the edge is so big and contains so many 'on' particles. Here we could see the primal relationship between big and small.

Ten degrees of bending which extend for two thirds of a circumference in any area within a trillion miles of the desired area alters the measurement between 'on' particles by one degree i.e. 0.2 cm more added to each of the adjoining boxes.

The above rules can be applied to any box in order to identify any area within the universe.

No.1

Dimensional Borders and Space Flight

Dimensional Borders and Space Flight

The sun`s spectrum dictates the Ebene of the point of break through through the limiting perspective or border. And as mentioned in early posts a 14 degree or 23 to 24 degree ascent for space flight is desirable. This depends on the time of day. The change of time of day can be artificially determined (see blog), partially by understanding and shuffling the colours of the spectrum at the outer border of the six inch cushion around the earth mentioned in recent work. 

Human physicality and Spaceflight

209.364 28.30.91 with the 28.30.91 being written smaller and at half the height of the 209 364 is the bio unit representing the heart aspect within space flight or more accurately a space journey.

A bio unit is a musical expression within the decimal broken state mentioned in work and in this sense refers to a part of the body associated to a varying position within the vastness of the universe.  A bio unit thus expressed is the working power within, sight and within physical objects.  Its temporal position can be described as Q or q, which involves in this case three seconds and these three seconds relate to its transferrable spatial position of 2.839.28 squared inches, when viewed from an all important visual distance of 12 inches, and when surrounded by a  reality frame (see blog).  See work on relative size in the 60Dimension.

The transferrable positionn of the heart or bio unit as illustrated above is within stage three of a computer programme. 

I don't know if these figures are a lot of nonsense but I can't express it in any other way.  Maybe the figures in my work are accurate or maybe not.  Maybe they will just inspire someone with more mathematical knowledge than me to work out some of the ideas in my work.

The visual distance mentioned above is the distance realised by the individual's consciousness when viewing a situation or object.  This consciousness has great relevance in the individual omnipresence calculations needed for successful space travel (see blog). 12 inches is the maximum and is associated to the actual distance mentioned in my work on visual scope.  Also actual distance can be calculated and varied according to the energy in spectral intakes, causing time to vary.  The 12" vary too but both of these aspects react  seemingly indiscrimanently from each other. There is, however, an angular relationship between the units on both scales and this follows an intricate pattern of recognition, especially that of organising the relationship of time to the permanent change in the position of items of reality.

Static Time Frames

A static Time Frame, which can involve the Person denotes infinity.  However, the individual Time frame is infinity and not the overall condition/picture it is in, i.e. that successive Time frames follow and preceed the static Time frame and that outside the walls of the Time frame there is a Time flow which can be relativised to it.  Once we percieve that things involved in the Static Time Frame are necessarily changing in relationship to each other we can associate this to their encompassing static Time frame and induce a Time flow, regulating its speed at will.

This aspect can be used in connection with the 'switch on' immortality needed to cover massive distances in space travel (see blog) and can be used to regulate the 73 years, i.e. a distance of one life span needed for a standared space journey.

Related to Post 'Dienstag 11 Aug, 2011'

This system is akin to joining up words and the joining up of words is covered by the visual scope system mentioned in work.  Sending words with our vision using the same angle energy counts seen in the work on visual scope is the broadcasting method which can remove hazzards in spaceflight.

Encircling an object or hazzard using the patterning depicted in my work of random circles connected by straight lines and re-placing the object by using the energy within sight and speech would help facilitate successful space flight.

Coded Light energy, involving many of the aspects covered in my work, i.e. those of colour and word power and that of gravity and its involvement in reality would have to be chanelled through the straight line leading to the random circle.  Once again a light gradation of between one and ten with ten subdivisions to each digit would be applicable.After this volume diminuation would have to be applied.Volume diminuation involves evacuation of almost all of the Time involved in a position, i.e. eliminating a Time Frame and relating things newly to each other.

More on the Design of Flight Lines

The arms lead from the flight lines denoted in blog in distances of every two inches.  This, however, appears visually on computer screen to vary.  This is an adaption, seemingly apparent, caused by Light (see my scale etc. on Light) interacting with gravity and to a lesser extent Time-Volume.  This adaption follows various rules: 12 inches of Light with my inclusions affect a count of gravity 70 (see blog) by two minutes per measuring square which puts up a line leading from the lower third of a flight line by half an inch.

More on Flight Lines

Flight Line angles within the 60D for the purposes of space flight have extremely small variations with major angles leading from them.  Time- volume can be calculated geometrically and follows most  rules in geometry (not that  I know them).  However, physical living/life factors, as mentioned, have to be added and this can basically be done by using the 36er system touched on in my work.

The arms extending from the lines denoted by the very small variations in angles depict a form of permanent entry into the 60 Dimension (see blog).  They help the 20 Dimension and 60 Dimension relate.

The larger angles are related to how the word functions on Earth and the smaller ones are governed by Time-Volume and by sound power by relativised calculations of gravity with minute changes of gravity being relevant(see work).

Understanding gravity differently (see blog) gives a link between the 20D (Earth perimeters) and the 60D.  Time-Volume relates to gravity through Light and Light to visual scope and humanly involved distance.